Risograph Repair Manual
2021年2月8日Download here: http://gg.gg/o8pu1
Error Codes List page 1
*Repair Manual Downloads
*Risograph Repair Manual Online
*Risograph Repair Manual Free
Risograph (riso) service manuals – service-manual risograph (riso) service manuals. The quickest method for finding the service manual you need for your model is to use the search box above. Use alphanumeric characters only – use a space for non alphanumeric characters. Risograph (riso) sf5x3, sf5x5, sf9 service manual. RISOGRAPH (RISO) Service Manuals The quickest method for finding the service manual you need for your model is to use the Search Box above. Use alphanumeric characters only – use a space for non alphanumeric characters. RISOGRAPH (RISO) SF5x3, SF5x5, SF9 Service Manual. The RISO VALEZUS T2100 high-speed duplexing cutsheet inkjet device can achieve up to 320 color impressions per minute, with full VDP capability.Error Code:
*Code: A01
*Description: Master feed error
*Causes: 201 Master-positioning sensor does not go ON even after the write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 Master-positioning sensor does not go OFF even when the write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 Master-positioning sensor is ON during standby. 214 Master-positioning sensor is ON at the start of master making. 215 Faulty gate-array control for the write pulse motor (motor does not stop within set time).
*Remedy: Open the master-making unit and rewind the master material on the master roll, and then reset the master, or turn OFF the power and power back ON.
*Code: A02
*Description: Master loading error
*Causes: 509 Master-loading sensor was OFF when the master was checked at a specified drum angle during the master-loading operation.
*Remedy: Pull out the print cylinder and set it back.
*Code: A04
*Description: Master disposal error
*Causes: 303 Check Print Drum - Master disposal error / Master disposal jam.
*Remedy: Pull out the print drum and push it back in.
*Code: A05
*Description: Master present in the master disposal area
*Causes: 304 Master disposal jam sensor was ON at the completion of the master disposal. 312 Master disposal jam sensor was ON at the start of the master making. 315 Master disposal jam sensor was ON after the completion of the recovery movement.
*Remedy: Pull out master disposal box and place it back after removing the jammed master in the master disposal area, or turn OFF the power and power back ON.
*Code: A06
*Description: Check paper feed tray
*Causes: 403 Either the upper or lower safety switch of the paper-feed-tray is OFF. Note: This detection is not made when the machine is in low-power-mode (24V OFF).
*Remedy: Change the condition of the paper-feed-tray upper/lower safety switches to ON condition, or turn OFF the power and power back ON.
*Code: A07
*Description: Paper feed error
*Causes: 409 Paper-ejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Paper misfeed). 412 Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). 413 Paper sensor was still ON (detecting paper) when the paper should have went out from the sensor. 418 The paper sensor was ON at the start of machine operation when the START button was pressed. 429 Paper feed error (recovery error). 432 Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed.
*Remedy: Error Codes List page 1Error Code:
*Code: A01
*Description: Master feed error
*Causes: 201 The Master positioning sensor does not go ON even after the Write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 The Master positioning sensor does not go OFF even when the Write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 The Master positioning sensor is ON during standby. 214 The Master positioning sensor is ON at the start of master making. 215 Sensor stop position of the Write motor is differ with programmed stop position. 258 Once after the Master end sensor detects the master end mark, the Master end sensor detected the end mark again.
*Remedy: Pull out the Master making unit, rewind the master and reinstall.
*Code: A02
*Description: Master loading error
*Causes: 509 The Master loading sensor was OFF when the master was checked at a specified drum angle during the master loading operation.
*Remedy: 1. Pull out the Print drum and remove the master from the drum. 2. Return the Print drum in place. 3. Press the [START] key.Repair Manual Downloads
*Code: A04
*Description: Master detected on print drum error
*Causes: 303 Check Print Drum - Master disposal error / Master disposal jam.
*Remedy: 1. Pull out the Print drum and remove the master from the drum. 2. Return the Print drum in place. 3. Press the [START] key.
*Code: A05
*Description: Master detected in master-disposal area
*Causes: 304 The Master removal sensor was ON at the completion of the master disposal. 312 The Master removal sensor was ON at the start of the master making. 315 The Master removal sensor was ON after the completion of the recovery movement.
*Remedy: Pull out Master disposal box and remove the jammed master, if the error persists, Call ServiceRisograph Repair Manual Online
*Code: A06
*Description: Check paper-feed tray
*Causes: 403 Either the Upper or Lower safety switch of the Paper feed tray is OFF. Note: This detection is not made when the machine is in low-power-mode (24V OFF).
*Remedy: Check underneath the Standard feed tray (Paper feed tray) and on top of the printing paper for any obstructions. Remove if any exist.Risograph Repair Manual Free
*Code: A07(J)
*Description: Paper-feed error
*Causes: 409 The Paper ejection sensor was OFF when the paper should have arrived, and the Paper sensor was ON when the machine stopped (Paper misfeed). 412 The Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). 413 The Paper sensor was still ON (detecting paper) when the paper should have went out from the sensor. 418 The Paper sensor was ON at the start of machine operation when the START button was pressed. 429 Paper feed error (recovery error). 432 The Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed.
*Remedy: 1. Check the paper feed side and remove the jammed paper. 2. Reload printing paper. 3. Press the <RESET> key if error display does not clear. When using special paper, adjust the Paper Feed Pressure Adjustment Lever according to the paper characteristics.
Download here: http://gg.gg/o8pu1
https://diarynote-jp.indered.space
Error Codes List page 1
*Repair Manual Downloads
*Risograph Repair Manual Online
*Risograph Repair Manual Free
Risograph (riso) service manuals – service-manual risograph (riso) service manuals. The quickest method for finding the service manual you need for your model is to use the search box above. Use alphanumeric characters only – use a space for non alphanumeric characters. Risograph (riso) sf5x3, sf5x5, sf9 service manual. RISOGRAPH (RISO) Service Manuals The quickest method for finding the service manual you need for your model is to use the Search Box above. Use alphanumeric characters only – use a space for non alphanumeric characters. RISOGRAPH (RISO) SF5x3, SF5x5, SF9 Service Manual. The RISO VALEZUS T2100 high-speed duplexing cutsheet inkjet device can achieve up to 320 color impressions per minute, with full VDP capability.Error Code:
*Code: A01
*Description: Master feed error
*Causes: 201 Master-positioning sensor does not go ON even after the write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 Master-positioning sensor does not go OFF even when the write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 Master-positioning sensor is ON during standby. 214 Master-positioning sensor is ON at the start of master making. 215 Faulty gate-array control for the write pulse motor (motor does not stop within set time).
*Remedy: Open the master-making unit and rewind the master material on the master roll, and then reset the master, or turn OFF the power and power back ON.
*Code: A02
*Description: Master loading error
*Causes: 509 Master-loading sensor was OFF when the master was checked at a specified drum angle during the master-loading operation.
*Remedy: Pull out the print cylinder and set it back.
*Code: A04
*Description: Master disposal error
*Causes: 303 Check Print Drum - Master disposal error / Master disposal jam.
*Remedy: Pull out the print drum and push it back in.
*Code: A05
*Description: Master present in the master disposal area
*Causes: 304 Master disposal jam sensor was ON at the completion of the master disposal. 312 Master disposal jam sensor was ON at the start of the master making. 315 Master disposal jam sensor was ON after the completion of the recovery movement.
*Remedy: Pull out master disposal box and place it back after removing the jammed master in the master disposal area, or turn OFF the power and power back ON.
*Code: A06
*Description: Check paper feed tray
*Causes: 403 Either the upper or lower safety switch of the paper-feed-tray is OFF. Note: This detection is not made when the machine is in low-power-mode (24V OFF).
*Remedy: Change the condition of the paper-feed-tray upper/lower safety switches to ON condition, or turn OFF the power and power back ON.
*Code: A07
*Description: Paper feed error
*Causes: 409 Paper-ejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Paper misfeed). 412 Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). 413 Paper sensor was still ON (detecting paper) when the paper should have went out from the sensor. 418 The paper sensor was ON at the start of machine operation when the START button was pressed. 429 Paper feed error (recovery error). 432 Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed.
*Remedy: Error Codes List page 1Error Code:
*Code: A01
*Description: Master feed error
*Causes: 201 The Master positioning sensor does not go ON even after the Write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 The Master positioning sensor does not go OFF even when the Write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 The Master positioning sensor is ON during standby. 214 The Master positioning sensor is ON at the start of master making. 215 Sensor stop position of the Write motor is differ with programmed stop position. 258 Once after the Master end sensor detects the master end mark, the Master end sensor detected the end mark again.
*Remedy: Pull out the Master making unit, rewind the master and reinstall.
*Code: A02
*Description: Master loading error
*Causes: 509 The Master loading sensor was OFF when the master was checked at a specified drum angle during the master loading operation.
*Remedy: 1. Pull out the Print drum and remove the master from the drum. 2. Return the Print drum in place. 3. Press the [START] key.Repair Manual Downloads
*Code: A04
*Description: Master detected on print drum error
*Causes: 303 Check Print Drum - Master disposal error / Master disposal jam.
*Remedy: 1. Pull out the Print drum and remove the master from the drum. 2. Return the Print drum in place. 3. Press the [START] key.
*Code: A05
*Description: Master detected in master-disposal area
*Causes: 304 The Master removal sensor was ON at the completion of the master disposal. 312 The Master removal sensor was ON at the start of the master making. 315 The Master removal sensor was ON after the completion of the recovery movement.
*Remedy: Pull out Master disposal box and remove the jammed master, if the error persists, Call ServiceRisograph Repair Manual Online
*Code: A06
*Description: Check paper-feed tray
*Causes: 403 Either the Upper or Lower safety switch of the Paper feed tray is OFF. Note: This detection is not made when the machine is in low-power-mode (24V OFF).
*Remedy: Check underneath the Standard feed tray (Paper feed tray) and on top of the printing paper for any obstructions. Remove if any exist.Risograph Repair Manual Free
*Code: A07(J)
*Description: Paper-feed error
*Causes: 409 The Paper ejection sensor was OFF when the paper should have arrived, and the Paper sensor was ON when the machine stopped (Paper misfeed). 412 The Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). 413 The Paper sensor was still ON (detecting paper) when the paper should have went out from the sensor. 418 The Paper sensor was ON at the start of machine operation when the START button was pressed. 429 Paper feed error (recovery error). 432 The Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed.
*Remedy: 1. Check the paper feed side and remove the jammed paper. 2. Reload printing paper. 3. Press the <RESET> key if error display does not clear. When using special paper, adjust the Paper Feed Pressure Adjustment Lever according to the paper characteristics.
Download here: http://gg.gg/o8pu1
https://diarynote-jp.indered.space
コメント